head bolt too? thank you Dale No - The gasket doesnt need anything to seal it .... u hafta be REALLY careful on those head bolts.....Torque in a cross pattern in 5 lb increments to 40 lbs. Make sure u
Question about 2005 FLHTC - FLHTCI Electra Glide classic
...15-18 ft-lbs 1/4" bolts 10-13 ft-lbs The 5/16" bolts torque to 15-18 foot pounds. The 1/4" bolts torque to 10-13" foot pounds. The socket head bolts on the upper cover torque to 80-110 inch
Question about 2000 XL 1200 C Sportster Custom
...head, the #1 bolt is the front bolt on the left side of the cylinder head, then the #2 bolt is the left rear bolt, #3 bolt is the right front, and #4 bolt is the right rear as viewed from the top of ...
...bolt torque specs are: 5/16th inch bolts = 15-18 ft. lbs. 1/4 inch bolts = 10-13 ft. lbs. The upper socket head bolts are 1/4" bolts but torque to 100 in. lbs. according to the book. Go figure. Good ...
head bolt for a harley davidson sportster Cylinder Head Bolt Installation Factory Method For each cylinder head, start with head bolt numbered one. In increasing number sequence (1-2-3-4), tighten the
Need engine torque specs for 02 harley xl1200c for heads and valve covers Hi Anonymous, and your torque specifications are: 1. 1/4" bolts 10 ft lbs. 2. 5/16" bolts 20 ft lbs. 3. 3/8" bolts 35 ft ...
torque specs what do the head bolts and rocker box bolts and cylender base bolts torque on a 1985 1000cc iron head Hi Anonymous, in a criss cross pattern and your torque specs are: 1. 1/4" bolts 10 ft
...torque specifications are: 1. 1/4" bolts 10 ft lbs. 2. 5/16" bolts 20 ft lbs. 3. 3/8" bolts 35 ft lbs. 4. 7/16" bolts 55 ft lbs. 5. 1/2" bolts 75 ft lbs. For more information about your question ...
head cylinder bolt torque specs 1995 what is the torque for head bolts on 1995 80" 1340 Hi Anonymous, it's too bad you can't find the very first and best tool you ever bought for your Harley Davidson.
Question about 1979 XLH 1000 Sportster
...bolt, thread and materials is all that is needed except on heads. When tightening head bolts it is important to follow manufacturers specifications. Other fastener specs may be found here; ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions