Question about HLP4663W 46" Rear Projection HDTV
...HDMI input. To get audio from the cable box out of the DVD player speakers, you will need to connect an audio cable from the cable box go the HT amplifier. Use a set of RCA patch cables and go from ...
...HDMI can be used in a setup like this. I'd try it from the home theater (HT) to the TV, and other wiring for the other components. For video: All of these should have component connections (Y/Pr/Pb). ...
RCA cable, optical, etc, Find the matching input on your receiver and voila! For your picture, lacking HDMI, use COMPONENT cables: WHITE, BLUE and GREEN, I believe, for best results. Good luck! http:/
...HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV's have a connector a DB15 MALE, so that the cable from the PC to the TV, is DB15. ...
...check is what type of cable is hooked up to the TV. To broadcast on channel 3 it needs to be connected from the receiver by a Coax cable instead of RCA/HDMI/Component cables. Tommy Faust DISH ...
RCA jacks, they connect there. If you're using the 3 wire cable, yellow is for video, and the red and white is for audio. You will NOT get HDMI pictures with this setup so you will have to go into the
...RCA cables, yellow, white and red to connect DVD player to TV as shown in the diagram below. Connect yellow to yellow and white to white. Connect red to red. Select on the TV, the A/V input where the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
