Questions & Answers for: Panasonic no hdmi input

Question about Viera TH-50PZ80U Plasma TV

1 Answer

...HDMI or other input labels, go to your menu, and into the Input Labeling menu (under settings) and make sure you have all the inputs you require enabled. Its possible you (or an out of the box error) ...

Ad

...work after lightening storm. TV works HDMI input from cable box and PS3 do not work.  PS3 works through SD and through HDMI on bedroom TV.  Are my HDMI inputs fried? try replaced H ...

Ad

Question about Viera TH-46PZ85U Plasma TV

1 Answer

...HDMI input: Excessive voltage from an HDMI cable connected product will activate the Plasma TV?s protection circuitry. Placing an isolating / buffering connector (sometimes called a voltage ...

input over either of the two HDMI inputs. The JVC RX-D411S receiver was working fine up until I used the VGA input with a computer and since that time, HDMI has not worked (despite working fine before

Question about PT-53TWD63 53" Rear Projection Television

1 Answer

...HDMI input on the back of the set does not work. It was working till just recently then quit. it's very odd that it would fail and its most likely that the HDMI input isn't the problem, the more ...

Question about PT-60LCX64 Television

1 Answer

HDMI input on TV has gone bad. Can I replace/fix this myself my purchasing a card? yes you can replace the input board, but that is fairly expensive. HDMI cables can go bad, have you tried a different

Question about TC-P50S1 50 in. Plasma LCD HDTV

1 Answer

...hdmi input After lightening damaged hdmi 1, Switch to hdmi 2, and ok, how do I repair hdmi 1 ? you are lucky both hdmi inputs aren't blown. The inputs are not repairable individually. You must ...

Question about Viera TH-42PZ80U Plasma TV

1 Answer

...HDMI input. Of course, even with HDMI in, you're only going to get a simple stereo output from the TV. You can use the analog L & R audio inputs for a very similar sound from the TV speakers. The ...

Question about TH-50PX50U 50 in. Plasma HDTV

1 Answer

HDMI input on my panasonicth50pz80u i get sound but no picture. i am suspecting a bad convertor or incorrect resolution settings? my tv accepts from 525(480)/60i to 1125 (1080) 24p inputs through HDMI

Question about TH-50PX50U 50 in. Plasma HDTV

2 Answers

...input 4 is hdmi 1 input source 5 is hdmi 2 input source HDMI is not a channel it is a cable plugged from other devices like DVD players into the HDMI input port on the back of the TV. I hope I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Panasonic Televison and Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...