Questions & Answers for: hd 570

...hd mitsubishi. Any ideas? check and re-solder the connections on the 2 convergence ICs in the middle power board. they are going to be attaches to the biggest heat-sink in the tv. if the re-soldering ...

i need sound sriver 4 Elitegroup amd690gm-m2 which is Realtek ALC883 support Intel 8-ch HD Audio, and by the way I looked 4 it in several website but no result, pls can u help? Go To ...

...HD of my Thinkpad 570 2644-1AG from 4GB to 10MB or even more. IBM system FRU parts list only shows 6,10 and 12 GB as compatible drives. I have found a 40GB Toshiba IDE drive , Toshiba P/N ...

...HD 1080. The sound works but the picture has so many lines running through it the I can't make out the picture. Please help. Thanks. Replace Both of your convergence ICs STK392-570 ICs will have Part ...

My sony projection xbr 57 in hd is ghosting if it's red, blue, or green ghosts, then you need new convergence chips, stk 392-570, have to be soldered in.

my tv has yellow lines and when the screen should be black its pink sounds like your light engine is failing you will need a new one around 570 just for the part

...HD TV and am having convergence problems it wont let me adjust the red and blue lines using the remote or the tv buttons is there a fuse in the tv that could of blown? No, you need to replace your ...

...HD 570 headphones. The plastic headband is broken where it attaches to the headphone. Can I order a new plastic headband and is difficult to replace? That part isn't available from Sennheiser. But ...

HD 570 Headphones; how do i get the old ones off? Thanks The ear padding is attached to and held in place by a plastic ring that fits into the speaker mount. Gently pull the ear padding outward so you

sound in one ear I had the same problem, and it is a very simple fix, the cable connection can fall out of the speaker piece on the right side. I have made a blog post with the steps for removing the ...