Question about 1 Hp 2 Speed Super Pump Inground Pool Pump ( Ssp2607 102 ) ()
...as familiar with the 2 speed hayward super 2, but the standard super 2's have a small ribbon seal, often called a rubber band. They are infamous for going bad especially after pulling the pump
Question about HAYWARD 1 HP 2 SPEED SUPER PUMP - INGROUND POOL PUMP -
...Hayward pump that is making a wining noise. Thank you for posting your question here on Fixya.com. Your motor bearings are failing. It is most often caused by a leaking pump seal. It is a relatively ...
Question about 1 Hp Super Pump Inground Swimming Pool Pump 115/230 Volts Sp2607x10
hayward sump pump and can't remove inpeller Thank you for posting your question here on Fixya.com. Removing the impeller requires you lock the shaft as you turn the impeller off counter-clockwise.
Question about 1 Hp Super Pump Inground Swimming Pool Pump 115/230 Volts Sp2607x10
...has a how 2 replace it for around 10 bucks. these pumps are known for cracking, but if you say its leaking from the center, sounds like a 201 hayward shaft seal. PRIME THE PUMP AFTER ANY REPAIR
Question about 1 Hp 2 Speed Super Pump Inground Pool Pump ( Ssp2607 102 ) ()
STA-RITE 5P2R-125G with 0.75 HP motor. Had bearings in motor replaced and was advised that shaft seal is also replaced. Now have a leak from the motor side of the seal plate at the bottom. They ...
Question about 1 Hp 2 Speed Super Pump Inground Pool Pump ( Ssp2607 102 ) ()
the pump's hoses leak where they are attached to the pool. Do I need a gasket? Krystal Clear 635T depending on how yours is hooked up, you need to either remove the ***** in fittings and retape with ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions