...avr 235 harmon/kardon reciever they sounded great everything was working well i left the room for a drinkwhen i got back there was no sound checked the wiring the speakers but still no sound coming ...
Poor Picture Quality Hi There: When I am using the component video (for either dvds or cable tv) the picture gets distorted when I turn the volume up on the reciever. If I disconnect the audio cables ...
AVR 235 stays on stand by My AVR 235 doesn't turn on, only stay on stand by. I shut down everything for 30 minutes and nothing, than I checked all speakers connections, same results. Hi... That sounds
Lost 3.2.1 surround function when I hooked up new plasma I am using a HDMI cable and optical audio from cable box I cannot get 3.2.1 surround from HD channels , espn etc HDMI cables contain both your ...
Harman Kardon AVR 154 OSD setup screen wont display cant get my initial setup screen to display on my tv when connected via HDMI It will only display via component. Your HDMI firmware is either 1.1 or
...Kardon AVR 235 no sound I have a Harmon/Kardon AVR 235 Multi-Channel Receiver. The problem with the receiver is that it powers on and all functions work, but no volume comes out. All functions work ...
avr 235 power at standby mode but sometime unable to power up, please help. A lot of thanks. Open the unit and measure the voltage across the reset microswitch on the transformer board (with the unit ...
i was playing music and all of a sudden no sound. cannot figure out the problem it fuse or read the guide it help ok !
wont turn on it stays on stand by This could be a power supply issue to a audio output problem, I strongly recommend a top notch tech to check your unit because this is a high end device.
...Harman Kardon receiver Type AVR 500 RDS. Can I set it to 5ohz or 60 hz as I wish? Should only set to frequency of your power supply otherwise may damage your receiver my harman kardon avr 235 have ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions