Questions & Answers for: hard to get in and out of gear

gear and hard to put in gear The mechanic should inspect then repair the shifting gears. And the gears on the transmission should be repaired or replace if worn out .the shift fork also have a problem

hard from about 3rd gear onward, when the revs on my 06 GSR 600 get higher that about 6000 - 7,000 rpm, the gear lever seems to go mushy and I can't find the next gear - If I aggresively decelerate or

...Gear shifts hard?http://schematicsdiagram.blogspot.in/2012/02/2000-nissan-maxima-shifts-hard.html-------Vehicle noticed sluggish delayed shifts while ...

gear It's not hard to start..it's hard to go in 2 and 3 gear After start go to D and then to 3 and 2. Usually 3 should get you enough power up or down a hill. What is hard about changing gear?

hard to go into first gear.and when you take off it still hard to go into 3,4,5,gears I have a hard time putting this truck in first gear or reverce.when I finely get it into first gear I take off,and

...gear only. It will have the hard shift/shift flare sometimes but other times will shift fine into 2nd and 3rd gear. It only does it from 2nd to 3rd all other gears shift perfect. Check transmission ...

higher gears. When coming to a stop, also down-shifts hard. You're probably shifting wrong. Or there's a problem with your gear ratio or clutch. are you grinding the gears or is it just shifting weird

After repairing transmission in Chevy S19 truck gears are hard to get why? comment on your statement of "hard to get" gears do you mean that selection is hard the selector lever is hard to move gears ...

hard to change to gear 5 from 4 or reverse it so hard please help hi when i am driving 120km/h gear 5 kick out to neutral itself. when driving on traffic slow when i must change gears its hard to take

Hard to select to 1st gear on Toyota Coaster Bus 1HZ engine when bus is in motion. Easy to shift when bus is stationary and idle but hard to downshift and select to 1st gear from second gear when bus ...