Questions & Answers for: hard drive jumper

...Hard Drive Model # 4D040H2 I have a Maxtor Hard Drive Model # 4D040H2 that I removed from an old PC. I want to use it on another computer using an external enclosure that has already been purchased. ...

...hard drive. Have this old HD I'm trying to use but don't know where to put jumper. Master ? will be only hard drive. Thanks, Ron Isn't that shown on the hard disk ? Even old hard disks have some ...

...hard drive and need to know how to set the jumpers on my maxtor 90645d3 please help.ty if you want to boot from this drive, please set the jumper to the master position. if this drive is for ...

...hard drive. Hard drives have three jumper settings on them. 1.MASTER---MA 2.SLAVE---SL 3 CABLE SELECT----CS If you have a hard drive on the end (last) on the ribbon cable connectors, then it is the ...

...hard drive for a 'slave' ? You need to set the drive as a slave by moving the jumpers the the correct pins. You should see 4 sets of pins, for slave you put the jumper over the second set of pins. ...

...hard drive then the jumper settings are marked on the circuit board. MA = master SL = slave CS = cable select If this hard drive is the one installed on the Primary IDE controller the the jumper has ...

...hard drive jumper settings for model 7245At maxtor hard drive jumper settings for model 52049h3 1. Jumper settings for model 7245At refer to LINK 2. jumper settings for model 52049h3 refer to LINK ...

...HARD DRIVE NEED JUMPER SETTING.WONT GO INTO STANDBY MODE, REBOOTS ITSELF Set The Jumper Setting On Your Hard Disk DriveThe hard disk drive will be detected as 32 GB if the jumper is set to the 32 GB ...

...hard drive? if the hard drives are new chances are the jumpers are still in small plastic package.the jumpers are little peaces of plastic with two holes with metal in them. the jumpers go on were it ...

...hard drive is factory set for single drive installation. Western Digital hard drives are shipped with a jumper in the neutral storage position (across pins 5 and 3) for future dual drive use. If you ...