emachine locked up won't start 1. screen on monitor went black 2. hard drive light on pc flickers at constant rate continuously 3. on-off switch would not work 4. unplugged machine to stop 5. would ...
bad hard drive? When I start up my T3065, I get a screen message :Primary Master Hard Disk S.M.A.R.T. Status Bad. Backup information and replace hard drive Failure Imminent. Is this for real or some ...
Question about T1840 CELERON 1.8 GHz 128 MB 40 GB HDD Dsktop Computer System (Mini-Tower) (1000000160) PC Desktop
Hard Drive I have a emachine t1840 the hard drive is faulty it started with a clicking noise from the hard drive.Can i replace it with a larger capacity hard drive. You can replace it with a larger ...
...found. how 2 solve or repair? help me... The PXE-X61 error means that the laptop cannot detect the hard drive. This can be caused by a faulty disk controller, or a faulty disk drive. 1st. Reseat the ...
I have a W3050 can I add a second hard drive. yes with a double connection hard drive lead.setup 1 hard drive to master and the other to slave on the hard drive jumpers situated on hard disks.setup ...
...the disk driver are in the wrong place, whats the right way they go in Primary IDE Connector with Hard-Disk Drive To connect the PC-DVD drive to the primary IDE connector with the hard disk,
hard drive makes a noise then computer freezzes on and off, why? Your hard drive is going bad. I would recommend that you back-up your data before the drive no longer works. Here is something you ...
...It seemed that the laptop is booting to the network to correct this 1. Go to the BIOS Check if the hard drive is detected by the computer (Hard drives are usually shown as alpha numeric) 2. If the ...
no operating system found it mean your operating system is corrupted or your hard disk is not detected with machine for operating system re install your operating system and if you face any trouble to
Question about eMachines Desktop PC
my emachines says it cannot find the hard drive and i get blue screen after i restart it how do i/ can i fix it Things to try: 1. Remove and reconnect the hard drive. 2. Remove all USB attached ...
Usually answered in minutes!
5,018 Questions
345 Questions
167 Questions
141 Questions