...specs for the wheels on a 1997 Dodge Ram 1500 4x4 135 ft lbs dry if you grease nuts 115 ft lbs you can set these at anywhere between 100ft lbs torque- 110. anything more is overkill. happy ...
...pin (if available). make sure there is no lateral play(up and down). you should be good to go. happy holidays you need torepace the large nut that holds the hub as it is a one use piece. and it ...
...to the direction of fuel flow arrow, if you install the filter backwards you will not be a happy camper at the results. Happy
...in with 4 bolts. If I've helped, please rate my assistance, and leave a testimonial. Thanks and Happy
...thing out, then reverse. Hope that helps. If so please rate my assistance and leave a testimonial. Happy
...problem and I should take to a dealer. I really don't want to take to a dealer, I've never been happy with service. Any direction to pursue? At least some likely causes that I can address with a ...
...to reach.in otherwords[knuckle busters] i have the manual in my library if you like,i would be happy to e-mail to you. thank you for choosing fixya.com look forward to assisting you in the
...happy with the way the engine is being controlled. That leaves other things like underinflated tires and driving habits. Vehicles with aluminum wheels have a problem with bead leaks. Accelerating ...
...or expensive to be replaced. If you would like to tackle the re4placemewnt yourself I would be happy to help however I can. Hope this helps and thanks for using
Question about 1997 Stratus
wheels through to the frame. When you put it in forward ans stand on the gas, the front end comes up. Look at a drag racer's wheel stand. Put it in reverse, and the opposite happens. The back wants to
Usually answered in minutes!
2,271 Questions
2,049 Questions
1,788 Questions
1,616 Questions
1,496 Questions