Questions & Answers for: handy switch Sewing Machines

...who are loose. If you are handy. you can remove the top cover of the machine. And on the left side of the bobinwinder you will find a micro switch. Probably you have to tighten the screw on

handy and turn the machine off. With your left hand, press and hold /StartStop, Up/Down and reverse while switching on the machine. The screen should display little cross hairs. Using the BLUNT end of

...switch well in this case YES you could do as you want. But it is unlikely you have one of those sorts. The controller is a Rheostat if you are handy enough I am sure one could wire another sort of ...

...switch on the machine.So the machine wont does not work when I press the pedal. Hello to fello seamstress; from repair tech. I've done this to mine. it takes a bit of time -- no big deal. You are not ...

...Handy Stitch in place with your right hand, press on power switch & begin sewing. Guide fabric (being sewn) with your left hand.To end this sewing session, turn off power. Turn handwheel to raise ...

switch or lever.You want the right hand needle in place,  remove the left hand needle.Thread upper looper with wooly overlock thread, this is a fluffy nylon that pulls flat under tension but

one for our desk top pc and the other for our daughters pc for her school work and they do come in handy

...handy stitch put batteries in and doesn't work why Faulty power switch If the batteries are good and are installed properly and the Handy Stitch doesn't work send it back. These types of products are ...

handy with mechanical things. Some machines also have a lever or switch that allows the feed dogs to be lowered out of the way. If yours has this, it may be stuck in a position below being all the way

...probably needs a slight position adjustment. However, as Roger suggested, I use a pencil or other handy tool to help guide the thread onto the bobbin if the bobbin is winding unevenly.