Questions & Answers for: Chevrolet El Camino handle lock

handle the linkage shoves down on the lock mechanism. But the linkage just goes through a hole at a right angle at the top and also thrugh the lock mechanism. I you have a diagram please share with me

Location of the power door lock relay Where is the power door lock relay located in an 84 el camino? Lower right kick panel, at the bottom access hole.

lost my ignition key for a 76 el camino .... how do iremove the cylinder to replace it You'll need a steering wheel puller and a lock plate removal tool. Remove the steering wheel and the lock plate. ...

How do I get the old iginition key lock out of the I have a 1972 El Camino and I am trying to change to key lock ignition. I have the steering wheel off and the turn signal arm off. I have the ...

...The turn signal flasher and hazard light flasher are located above the parking brake release handle.  They are behind the dash panel with the prongs facing the driver.  The turn ...

goes out of lock-up at cruiseing speed The lock up torque converter clutch circuit may be clogged. Try flushing and filling with transmission fluid at a shop, and if that doesn't remedy the problem ...

how do you remove the interior door handle on an el camino If you push back the panel so you can see behind the handle, you will see a stainless steel wire clip. Just hook it from the backside with a ...

i have a 1986 El Camino that I want to install a SS gauge cluster, instead of the idiot lights that came in it. Will I have to change the wiring harness, or is it capable of handling this conversion. ...

Power door locks dont work with key, only with button Hello, I have a problem with my 1980 Chevy El Camino - i cannot lock and unlock the car from outside by key (only with force and not completely). ...

Need to start1986elcamino no key remove horn cover, screws from backside of steering wheel, unplug wire to cover for the horn. loosen and remove 7/8" or 22mm nut from center. using steering wheel ...