Questions & Answers for: Kenmore handle buttons

...Some of these has a reset button to push on the powerhead. Check the plug at the end of the hose handle, is it pushed in, if you push on it and it goes further in, then the tube in the handle will ...

... Also the powermate Jr. has not worked for about a year. Help!!! You could have a bad switch in the handle on the hose, may also be that the female plug at the end of the handle has broken loose ...

...also have pressed the reset button. still no power Have you checked the screw that holds the handle to the vaccuum? If it is loose, the power will not go on. Try it! Worked for me! ...

My progressive canister stopped the handle button clicks on, I hear a switch in the canister go on, but the machine doesn't start/run buy anew one

...- button doesn't seem to do anything. Button loose??? The brush roll will only spin when your handle is not in the locked upright position, once the handle goes upright - the brushroll ...

...does not rotate, it's not getting the connection unless I push down maintaining pressure on the handle. Hi, try pushing the reset button with a pen or paper clip. If that doesn't work, the motor ...

...switch on ???? if you took the hose out of the wand assembly then it may not turn on as the hose handle has a power button on it and must be connected to turn on the unit.Also check the powerhead ...

I have Kenmore HE5T Error code F71 Pls advise handling. Thanks. Hi, F71 points at a connection error between button pad and control board. Please read the indications in this article: F70 and F71 are ...

is there a rest button . there is powere to the dishwasher but nothing comes on Reset buttons are not the problem, check the safety door switch that engages when you close the door and turn the handle