instrument panel lighting on 1999 suburban the back lighting which illuminates the instrument panel when it is dark ( at night) is not working how do I replace bulbs Changing the bulbs can be a ...
as so as i replace the brake light fuse and step of the brake it blows i've replace the brake lamp switch and check wiring at the switch and and the rear lights all look fine what next if the socket ...
brake lights will not come on. It is not the bulb. The tail lights work. The tail lights working would not necessarily mean that the brake light bulbs are good. If they are the type that have a double
My hazards come on when I turn left signal blinker. I replaced dimmer switch. Still same problem. Any suggestions? A suggestion? Here it comes...I presume when you are saying you replacedthe dimmer ...
Left brake light not working. Checked bulbs & Left brake light not working. Checked bulbs & fuses all good any suggestions? clean socket then apply electric grease and bulb dont use that bulb ...
how do i replace the bulbs in the steering wheel on my 2005 suburban you don't they are not bulbs,
Every time you put a new fuse in it just pops and the truck will not start You have a dead short get a flasher bulb (12v 21w) connect across the fuse it will light up go around and wiggle wires till ...
driver side taillights not working Obviously check the bulbs or try known good ones. Next check the connector that plugs into the circuit board at the tail lights, carefully look at the black wire ...
On my 2003 chevy suburban the right brake light does not work. Tried replacing the bulb. Didn't work. Took it to my mechanic and he tried the brake pedal switch and it didn't fix it. He also ...
...and DRL's CHECK ALTERNATOR OUT PUT VOLTAGE COULD BE OVER 15 VOLTS OR YOU ARE TOUCHING HALOGEN BULBS WITH YOUR HANDS THE OILS FROM YOUR HANDS OR FINGERS WILL CAUSE HALOGEN BULBS TO ...
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions