Questions & Answers for: haier washing machine spinning clothes

Question about XQJ50-31 Top Load Washer

1 Answer

...Haier washing machines, but most of the big stores I've called don't even sell Haier products. Would anyone know what the problem might be? We really need an expert's opinion. Would it even be worth ...

Ad

Question about XQG50-11 Front Load Washer / Dryer

1 Answer

haier xqg50 will not dry; It runs the full wash cycle, and will actually run the dry cycle, but the clothes come out comletely soaked. Ran the full 120 minute dry cycle three times, and the clothes ...

Ad

Question about XQG50-11 Front Load Washer / Dryer

1 Answer

error code 8 - does not spin clothes dry? Have you checked to see if your belt is slipping or worn?

Question about XQG50-11 Front Load Washer / Dryer

1 Answer

...washing machine doesn't start sometimes it starts after many trials by moving it. thanks in advance. It is possible that the machine does not start off the cycle because there are errors or back ...

Question about XQG50-11 Front Load Washer / Dryer

1 Answer

...machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve ...

SOUNDS LIKE MOTOR IS TRYING TO START TO SPIN DRY BUT DOES NOT ENGAGE my machine does not wash clean the cloth

Question about HLP21E Top Load Washer

2 Answers

Haier not drying My washer dryer, washes clothes normally, but then takes hours to dry. It can take a whole day to dry one set of clothes. It heats up and spins, so I can't understand what is going on

Question about HLP23E Top Load Washer

1 Answer

...washing. It also drains water, but does not dry spin after draining water. For some reason it switches back to rinse cycle. This started happening after a cloth got stuck and I started getting E3 ...

...it goes back to RINSE cycle status (getting water again). Were you able to fix it? I recently replaced Haier Washing Machine Water Inlet Valve WD-7800-23 because machine would not control water

...dry clothes. Hi Cindy, I think that you're going to have to remove the control panel and see if you can get to thebuttons from the back. Make sure that power is off. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...