Questions & Answers for: haier dehumidifier fan working

Haier dehumidifier made a loud clicking sound At 3 months old the dehumidifier made a loud clicking noise when turned on. The sound went away after about 30 seconds. I went to work for 8 hours. When I

...Haier HD451-T (not the 451E that was closest in your dropdown menu). The moisture control knobs and fan appear to work normally, the little lever is touching the round pad on the collection bucket, ...

...fan is running. Think compressor is shot or needs freon? Hi, There are many reasons for a dehumidifier to not work or collect water. Here is a tip that I wrote to help people to figure out what is ...

...fan is on but no water is collecting My dehumidifier is on, the machine seems to be working, the filter is cleaned but water seems to have stopped collecting in the bucket and it is dry,,,help! Check ...

...dehumidifier to the on position, the fan runs, but it is not taking any water out of the air. It never fully engages like it did in the fall. (I had the unit turned off all winter). Is my machine ...

dehumidifier the fan runs but it does not collect any water Hi, There are many reasons why a dehumidifier willnot work or collect water. Here is a tip that I wrote to help people to figure out what is

dehumidifier fan runs but not a drop of water in bucket Hi, There are many reasons why a dehumidifier willnot work or collect water. Here is a tip that I wrote to help people to figure out what is ...

Fan runs, but no water in the bucket Hi, There are many reasons why a dehumidifier willnot work or collect water. Here is a tip that I wrote to help people to figure out what is going wrongwith their ...

...Haier HD656e which powers up, all controls work and the fan runs, but no water runs into the bucket. The compressor doesn't appera to come on. Anything simple I can check? Hi, There are many ...

...Fan on a Haier HD456E always run, and if so is this how all newer dehumidifiers work? My old unit would totally shut off when the desired humidity level was reached. The unit seems to be working fine ...