Questions & Answers for: i was hacked Sewing Machines

Janome 10001 Machine sounds like it is straining when either sewing or doing embroidery. The red light comes on stating to check if needle is bent, material too thick or something is stuck in the ...

the bushing or washer around the thread take-up The bushing or washer around the joint of the thread take-up arm has been damaged by having thread wrapped around it. Where can I see a schematic or ...

This is the 2nd time I have had to buy a new bobbin case base for my Bernette. I can't figure out what the heck I am doing wrong. It will jam and then after awhile it no longer wants to sit in it&

how do you slow down the consew 206rb The motor says its rpms are 1425/1725- we want to know if there is a way to slow it down by motor, or by pulley , and if so, how do you go about it? You don't

singer futura xl 400 problems So I just bought my Singer Futura XL-400. I set every thing up and all in the order singer tells you to. I test the embroidery aspect with 2 different designs from the ...

Scissor button stick hand wheel won't turn Sewing Machine Measuring Tape Scissors Iron Button ... www.amazon.com/Sewing-Machine...Scissors.../B00K... 28 Sewing Hacks That Will Change Your Life ...

placing thread on jones 871 If you have infidelity issues or credit score issues and you need credit repair or better rating like I needed, I strongly suggest you hire a smart, experienced and ...

Bernina 830: When making a buttonhole... the zigzag #1 stitch on left side looks nice... then the #2 bottom bar tack looks good... ...PROBLEM: #3 stitch sews, but not as dense as the #1 stitch on the ...

I'm looking for a sewing machine hack. How can I add a zipper foot to my Janome Sew Mini? According to Janome, the Sew Mini only has one presser foot to choose from, period, and that is the standard ...

My Singer Golden Touch and sew 750 will not make a straight stitch when set on the straight stitch setting. If I put it on zig zag with a zero stitch width, it makes a straight stitch fine. I've been ...