Questions & Answers for: gun canister

cant find out where i get a new gun handle mine has snapped the gun handle has snapped i cant find out where to get a new one could you help i live in manchester ps on my polti 2400 ...

light comes on fan comes on but gun doesn't shoot has plenty of fuel in canister ther is a depth adgustment on the front of the gun,try lowering the adjustment tip a little at a time.see if that works

...gun. Then insert the CO2 canister and screw in as you normally would. (4.) Go shoot stuff. (5.) Do not take the gun apart. This is a GREAT gun except for that one engineering flaw. Mine lasted like 2 ...

...gun without any paint/material. i can feel the material inside the canister bubbling but nothing is happening Check that valve inside the canister that let the air in and make sure it works freely. ...

...finish. After cleaning I tried to run some water through it and it wasn't picking up anything out of the canister. You have to strip the gun after every use and soak in laquer thinner or paint ...

...gun does not seem to want to fire it is virtually brand new i havent registered it with pasloade so cant send it back under there warranty could anyone help please? your gas has expired ,  look ...

canister and blow out charcoal with compressed air. wear safety glasses. you will need to blow from both ends several times. don't give up at first nothing comes out and when you pull air gun away

...when the trigger is pulled, and fails to fire nail. I have two guns, so i know the gas, nails and battery are all fine. Thanks in advance. Is the gas port clogged where the gas canister feeds the

...gun problems doesnt seem clogged but paint not coming out. Not drawing paint out? did the canister tube fall out? dump the paint out into a saveable container and put straight (enamel reducer) in it ...

...the same amount for the low pressure gun 25-45 PSI, Sory the gravity gun is the ones that have the canister in top the gun not bellow .(HVLP) High volume Low Pressure just in case you dont know