Questions & Answers for: Kenwood ground wire

Question about KGC-4042A 5-Band Car Equalizer

1 Answer

...power wire. generally red is the ignition wire, black is ground, orange is 12+ all the time, a yellow could be the same....it would be more helpfull if you would give the model number of the ...

Ad

Question about DNX7100 Car Video Player

6 Answers

...ground the wire which is supposed to be connected to parking sensor. This will bring back full bluetooth and dvd capability for the unit - Have fun ground parking wire to pink/ gray parkk/sens wire ...

Ad

Question about KVT-617DVD Car DVD Player

1 Answer

...wire to a ground (I used a screw near the fuse box), and I put a switch on the wire, so I could break the ground contact at will. Jensen calls for a procedure to activate DVD playback. In their ...

Question about KVT-617DVD Car DVD Player

1 Answer

...ground my receiver? Use the black wire in the wiring harness, and connect it to the black wire in the car's harness. This grounds the receiver. If you have a chassis ground (a braided cable) for the ...

Question about KAC-5201 Car Audio Amplifier

1 Answer

...GROUND LOCATION. IF CONNECT REMOTE WIRE FROM THE RADIOS REMOTE TURN ON LEAD WHICH IS A BLUE/WHITE WIRE OR A STANDARD BLUE IF ITS JUST ONE BLUE WIRE. CONNECT THIS LEAD TO THE REMOTE TURN ON CONNECTION ...

Question about KAC-5201 Car Audio Amplifier

1 Answer

...Ground the wire somewhere inside the dash, to a metal support piece. If this doesn't work, you may need a switch on the ground wire to allow you to apply and break the ground connection per some ...

Question about KAC-9152D Car Audio Amplifier

1 Answer

...ground wire screw and the amp cover at the same time. if i just try to screw the ground wire down it wont turn on at all. what do you think the problem is? try this it may help the amp body may need ...

Question about KAC-9152D Car Audio Amplifier

2 Answers

...ground wire. If you don't have a sturdy ground it can't complete the circuit. Make sure to grind off the paint so you're grounding to bare metal. Also, make sure your ground wire is the same gauge as ...

Question about KAC-6104D D Class Mono Power Amplifier

1 Answer

...ground wire of the receiver/head unit or the amp itself is not properly grounded. 4) When the amp itself malfunctions and a DC is sent to the speaker output. First check your power, ground and remote ...

Question about KVT-719DVD 7 in. Car Monitor

1 Answer

...wire is ground and should be ground to the frame of car lets take your radio ground and put your volt meter black lead on it and then put the red test lead to the read wire and if you have a good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio and Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...