Questions & Answers for: Cooper Wiring Devices ground an outlet

I installed gfi outlet and I have no power! Is there a wiring diagram for this type of outlet. In the same box I have a 2-way switch and light switch turn off circuit, test to make sure its off. ...

i have cooper combination switch and gfci out let they gave directions for gfci outlets how do you wire it using the switch o control the outlet Hi ,., the two screws on the one side of the combo are ...

outlet, with the ground opening at the bottom ... the white wire attaches to the wide slot or the slot on the left (silver screw), the black wire (narrow slot) attaches to the brass screw on the right

...lead feeds both SP switch and outlet Not sure how to wire up the neutral The big slot is the white wire ground is the green screw small slot is the black wire the 2 screws next to each other is the ...

I just replaced a switch/outlet with a 274V and used a circuit tester and got a correct signal on the outlet circuit but the switch light remains on in both the on and off position and my garbage ...

...hot wire was properly instralled and the neutral wire was properly installed and it was properly grounded yet the red switch light that is only supose to illuminate when the switch is on is also ...

...outlet device has 4 terminal screws (plus green ground screw for bare copper ground wire) 2) Two of the screws are labeled LINE. These screws are where the black Hot wire and white Neutral wire are ...

...instead of light bulb. So the Load will have 2 wires. The black wire from switch connects to brass screw on outlet. The neutral connects to silver screw. Bare ground wires connect to green

...ground terminal on the outlet.  You might have to add a screw to the box.  But if you don't have a grounded box, then the right thing to do is to rewire it all the way back to the main ...

...or the wires are flipped. WHT. To the common side and black to the darker side and it has to be grounded .exspeacily if it is a led