...gear lever will not go in reverse. I was told it is a common problem with the model. Please advise/share any info, thanks. some of the times it can be the gear link so what u need to do is to get ...
Question about 2011 Meriva 1.7
...go up hill it starts to judder,if I ease on the gas it is ok,there are no warning lights on, it's only just started doing it Giving the car long blast up the motorway It's a gearing issue. ...
Question about 2011 Meriva 1.7
opel corsa 1.4 2009 model has a gear problem. gears going in hard if the car is on but soft if the car is off Probably not enough clutch clearance either air in the system if it's hydrolic cable ...
Question about 2011 Meriva 1.7
how to fix opel corsa with gear problem that if the engine is on gears are not going in but if the engine is off the gear are ok new clutch how to fix opel corsa utility 1.4 with gear problem that if ...
Question about 2011 Meriva 1.7
my bakkie dont want to go in 5th gear, its a 2002 opel corsa diesel 1.7 check the bushes on the gear box linkages and gearbox mounting bracket.
Question about 2006 Corsa Utility
2008 Opel Corsa Utility I can get the gears but i cant go the car stalls. I only can go in 4th gear ? Hi, i would get your clutch thrust bearing and the clutch looked at.
Question about 2006 Corsa Utility
...gear on a opel corsa utility 2005 dti My personal suggestion would be to go for these repair catalogs. I know this website www.reliable-store.com that i used to get manuals from, and they have all ...
Question about 2006 Corsa Utility
opel vita parked it yesterday,then today sterts but doesn't move when I pu to gear automatic transmission? check fluid level 1 qt low and car wont go into gear
Question about 2006 Corsa Utility
...gear - when gearing down. If the mileage on the car is high it might be the clutch pressure plate going U/S and need to be replaced. It can also be (if fitted) the cable between the pedal and ...
Question about 2006 Corsa Utility
...gear linkages to operate the clutch hydraulics. It is possible one of these gears has broken. This means the pedal isn't actually connected to the clutch causing it to go soft. Hydraulic clutch line ...
Usually answered in minutes!
57 Questions
54 Questions
29 Questions
29 Questions
43 Questions