...GM, Onstar, XM, Tuner) wherein the "front 1" RCA inputs are being used (the H700 has room for two sets of front inputs (front 1 and front 2, I assume for the tweets, and the other for the woofers). I ...
...low beams. Also how do you reset the clock? I hate to sound like a putz but nothing that usually works in other cars/trucks I've had works in this truck. The hi beams should be on the turn signal ...
...GM radio from a junk yard. I had the volume turned down low because of a busted speaker and when I went to replace the radio, I unplugged the old one and was outside the cab prepping the replacement ...
...Radio comes on yet the volume is low and won't turn up. What is the problem? I suggest you have the dealer look at this, you can't get parts for the AMP as GM doesn't sell them to the ...
...radio or just blown front speaker channel . Your best bet , take it to a GM dealer or someother qualified repair shop . You have no idea of the complexity of this . The radio can set DTC'S - ...
Question about 2010 Cobalt
...GM factory scan tool ,Tech 2 scan tool ! This would be done to see if the PCM is receiving a voltage signal from the fuel sending unit in the fuel tank . An to see if it is sending a signal to the ...
...Radio Error Messages • Theft Deterrent • OnStar ® • Steering Wheel Controls • Auxiliary Input Jack • Noise Compensation • Speed Compensated Volume (SCV) Do you know what RPO code is an where is ...
...radio. Check with an OBD scanner for stored comn faults related to the Instrument Panel. GM of that era has a poor record with failing IPs due substandard soldering and metal migration. As always, ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions