Questions & Answers for: glue magnets

... please help if you can, thanks! The door of the IR is held in possition with a magnet.You can just glue tye magnet back in it's housing and the magnet wiil hold the door inplace.Just remember to use ...

Speaker was dropped - Tweeter Magnet came off - looks to have been glued on by manufacturer. What type of glue should I use? JBL EON 15 Thanks Clean the mating surfaces very well, mark on the side of ...

I used superglue to attach a magnet to a a snug metal post,I put the magnet in backwards and want to get the magnet out? Can I use acetone based nail polish remover or olive oil or another product to ...

...bit remove the magnet and get some construction grade adhesive center your magnet on the plate and glue it down make shure you get a good layer of glue down or it wont stick.wait 3 days for it to ...

...glue. The magnets come in lengths that aren't very long. I used 4-2" length magnets. I glued 4 inches at a time. 4 hours drying time in warm dry weather. Longer for cold. Apply glue to the window ...

...glue the alternator magnets to the rotor of my 1989 Kawasaki ex500, I am not sure what arrangement to set them in as each magnet face has a north and south pole, can anyone help? I on This is a 6 ...

...off the windshield completely. It seems there is a magnet in the actual mirror and another magnet glued to the windshield. The magnet glued to the windshield has come off. I live in Texas and the ...

...as well. Drill a like sized hole in the door and the frame, Gorilla glue the magnets in the magnets, and there you go. This is a guess, but why wouldn't it work? Super glue might be better. Try

...tub. Be sure the polarity of the magnetic strips is correct so they attract each other. You could glue the strips to the cover attach the tub strips to the cover strips then apply glue to the tub ...

...that "glue " would be used the magnets would be fixed in during the manufacturing process of the flywheel if you consider that the magnets have lost their properties then a new flywheel is the ...