Questions & Answers for: gfci

gfci breaker for spa 50 amp breaker keeps tripping, older hot tub,new gfci breaker, new wire, new gronding rod,etc. installed new control board, checked all connections, to incluce ground wire to ...

voltmeter trips GFCI Ideal Vol-Con XL 61-086 model. When trying to test a GFCI outlet the meter trips the GFCI. Works ok on any outlet without a GFCI. Is this normal for this model tester or is ...

Delfield freezer 6151-S keeps tripping GFCI Delfield freezer model 6151-S was purchased used and has been working just fine until about a week ago. It is plugged into a dedicated GFCI outlet (nothing ...

I want to install two GFCI receptacles in an outside box. One is the Cooper with the on/off switch and the other a Eagle GFCI (no on/off) can/should this be done? and if so, how? We have wired it ...

I have 2 gfi outdoor outlet with orange lights on and cannot reset GFCI is designed to detect ground faults, and will not reset if ground fault is detected, or if device is bad. Seems odd that both ...

...from gfi to spa 60 amp gfi does not come with one. Question is not fully clear. 2-pole 240Volt gfci circuit breaker requires the white wire be connected to neutral busbar. Easy solution for ...

2 swimming pool lights and a spa light are on a gfci plug. has been working 5 years. now when you turn on spa light it trips gfci new gfci has been installed still tripd Do you have 2 GFCI on same ...

I have a gfci/switch and need a 4 wire instructions. As none of the diagrams match what i have. What device are you replacing... a switch or a outlet? 1) If you are replacing a switch with 3 or 4 ...

Motion light after a gfci plug trips, My motion light installed after a recptical no longer works when a gfci unit was installed.The light comes on for 2 seconds then trips.I have double checked all ...

The GFCI connected to Intelliseat ISB-200 disconnects when the plug is inserted when connected to power bypassing the gfci the seat works I have a safety concern about e GFCI Is this a new bidet ...