Questions & Answers for: gearbox selector problems

...selector in your gearbox you will have to take out the gearbox and replace the pin , if your after doing to much driving on it you might have to replace the 3rd gear selector , this is only a guess ...

...selector inside the gearbox is worn and needs replacing if this is the case then it would be cheaper to get a reconditioned gearbox as repairing it would cost about the same as a recon. If you need ...

...gearbox selector housing - if it's a manual of course. I think you will have to remove the gearbox selector housing to enable this. Be also careful of wiring for different switches and the like. I ...

...gearbox and the selector fork has popped off the selector hub inside the gearbox...It will have to come out if this has happened. So check for any linkages attached to the gearstick an make sure they ...

...there is a pin that goes down into the gearbox. Wriggle the selector on top of the gearbox to see if there is much play in it. If so the pin may need replacing. It could be cheaper than a

...from the gearbox,if you can select all the gears the problem is the linkidge if not the problem will be internal, (which could be a selector in the gearbox its self. which ever one it is best of

I can only get reverse on my fiat punto what do you think is the problem Selector arms come off from gear stick to gearbox or gearbox internal selector fork problems

...a selector gear cable or internal gearbox syncro problem did not think the shift stick goes direct into the gearbox gear selector inspection remove the console around it see if the bushes are ...

...Mahindra 3510 tractor. When I put it in reverse it keeps kicking out of gear. That is not a clutch problem it is a selector problem in the gearbox you need to check the reverse selector dogs and ...

gearbox. I have checked the cables to the selector seems fine, The linkages seems fine, so what might the problem be? The front of the gearbox is missing a gearbox mounting, could this be the problem?