Questions & Answers for: Ford Escort gear problems

Ford Escort 1997 Problems shifting gears While I am driving the car has problems shifting gears. It will shift gears but only after pressing the accelerator at length. The problem never stops while I ...

...problems (gear linkage) having just renewed the clutch in my ford mondeo i am having problems with the gears. I am able to get 2nd,4th,5th and reverse but when I attempt to get 1st or 3rd gears and ...

SHIFTING IN TO 3RD GEAR I AM HAVING TROUBLE WHEN I SHIFT IN TO 3RD GEAR IT POPS RIGHT OUT OF GEAR EVERYTIME.I CAN SHIFT IN TO 3RD BUT I HAVE TO HOLD IT IN GEAR AND I CAN FEEL IT WANT TO POP OUT OF ...

...with key went to starter and jumped it, car started but now wont shift gears. will nutrual switch cause these problems SOUNDS LIKE YOUR GEAR BOX IS EITHER SEIZED OR STUCK IN TWO GEARS COMMON ...

Slips Out of first I have a 98 ford escort and it slips out of first gear and sometimes first gear wont even work at all. What could be the problem? I assume your talking standard shift transmission ...

ford fiesta 1999: trouble shifting into 5th gear The car works perfectly accept when it come's to shifting into 5th gear. All the other gears pose no problem. I'v tries coming from low or high revs, ...

gear box problem i have ford escort flight 1.8tdi everything was fine driving yeserday call at the local superstore. got back in the car started it up tried to put into gear could not put into gear ...

...gear. Brought it into a dealership and they said I need a new clutch. Wouldn't I be having problems with all other gears if it was the clutch? Yes you would . A clutch ploblem would affect all ...

why is the gear shifter on the 1996 ford escort shake when in 5th gear? Often this is wear in the linkage and not a problem in the actual gear box. Often the bushings wear or elongate allowing for ...

...gear 2 didn't work so now I use its likes a manual LOL. When I stopped at traffic light, I need to put "L", after moving about 20KM/H, I put it on L2 and after 60KM/H then I put on D and OD signal ...