...gear and it don't miss then you may have a problem with a sensor on the transmission it can be sensor or a bad converterbut to be sure you should take your vehicle to a mechanic and have it scanned ...
...gear lube I had this problem in my 95 wrangler and the problem went away. Its going to be hard to find tranny parts for that car I just put a new tranny in from the junk yard with 70k miles for $200 ...
...parts and labor generally is very high. One mistake can cause the gears to eat themselves up within a very short time. Gear sets don't often fail unless they are subjected to abuse, therefore there ...
gear to check the clutch pressure plate condition and synchronizers and gears itself/ it must have get stuck on one of those gears/get it done before the problem gets even bigger and spare parts costs
Question about Cherokee Sport Disc-Brake Mountain Bike
the gear handle seems to be ceased. can i take it apart and put some oil on it Simply filling oil will not be a solution because if it is some other part you can do it, but it is a gear part you have ...
...parts.....you have a ring gear and pinion gear (matched set) and a set of spider gears or a positraction unit. Those are known as the center section. you also have a pair of axles. Of course those ...
...parts to rebuild your steering gear, but in all honesty for the trouble and time you will have invested in rebuilding the thing. If it were me (and beleave me when I say there was a time I wanted to ...
jeep liberty part time light stays on when not in gear. The jeep is not in gear and the part time light stays on. Runs like normal just need to turn off the light. Do you have the 4 Wheel Drive ...
gear is caused by a $1 plastic part failure so pull the shifter off top of the shift tower. and look, is the plastic buffer parts all bad, missing, cracked or destoryed, sure they all end there... all
Question about 1994 Wrangler
What do they mean at 12 o'clock and at 6 o'clock on the timing marks on a 4.0 jeep grandcherokee 12 o clock is the top part of the gear 6 o clock is the bottom part of the gear
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions