Questions & Answers for: Ford F-250 gear

...assy. closest I have is 94 explorer. may be similar. Item Part Number Description 1 3E501 Steering Gear Sector Shaft Seal 2 3524 Steering Gear Input Worm Gear and Rack 3 3647 Steering Gear Worm Ball ...

Ad

...it the vacuum modulator? 91 ford explorer vacumm modulator usually causes not to go into gear easy.. if you are going into gear then give gas and it slipps out of gear and fluid is good ...

Ad

Question about 1985 F 250

1 Answer

hard shifting, hard to get out gear and hard to put in gear The mechanic should inspect then repair the shifting gears. And the gears on the transmission should be repaired or replace if worn out .the

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

The truck will reverse, but won't move in drive.. just won't budge. there is a good chance its the gear link to the gear box thats fell off! so you move the shifer but nothing on the gear box moves ...

I need to correctly put a F250 with a 86 351 winsdor motor back in time? - time chain and gears Not terribly complicated. Set the crankshaft at TDC on timing scale before you start, as a reference. If

tranmission ford automatic will not stay in 3or 4 gears transmission will not stay in 3 or 4 gears model e4od 4wd sounds like your syncroids are off, gears tend to wear,and when they wear down so much

...liter deisel pickup which means i replaced the rods, mains, and oil pump in the engine. i lined the gear timing marks up on the crank, cam, and fuel pump gears. and now when it starts it cranks fine ...

...cable is turning as the vehicle is moving .if not then you may have a bad/damaged speedometer drive gear in the transmission,this is located were the cable attaches to the transmission.remove cable ...

3rd gear looses all power starts jumping Check the clutch plate. It is worn out. Have it changed. As you are going to get the gear box opened, to change the clutch plate check the gears and see that ...

Question about 2001 F250 Super Duty Super Cab

1 Answer

how to change worn spider gears the rear spider gears are worn and when shifting from forward to reverse (on the column), I feel the gears jump. How can I change and which model gears do I need new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...