Questions & Answers for: ge washer reset electronics

...reset button Here's what the GE technician just did at our house to reset the electronics: Unplug the machine for at least 30 seconds. Plug it back in, then open and close the lid six times. That ...

washer will not spin ge top load Electronic motor needs to be reset. Unplug for 2 minutes, plug back in, open and close lid slowly 7 times to reset computer. Also check to see if belt is not broke, ...

...GE Front loading Energy efficient washer will wash, however; when it gets to rinse and spin, it stops itself and the button lights up for me to press to start it again. It does this 4-5 times during ...

GE top loading washer does not spin out water My GE top loading washer will not spin, therefore the clothing is still dripping wet. The belt could be broken, if not. Unplug washer for 2 minutes, plug ...

...GE Washer #WBSR3140G1WW will not spin and the red light on the lower panel flashes 1 time every 10seconds, what do I need to do to fix it? Check belt. If belt is ok then unplug machine for 2 minutes. ...

washer runs and spins but will not agitate Try this, unplug washer for two minutes, plug back in, open and close lid seven times slowly, this will reset the computer and the electronic motor.

...ge wpre6150k2wt Hi Shelly,.... This is what I was able to locate for you. (Electronics need to be reset: Unplug washer, wait 2 minutes, plug back in and press START) It's on page 9 on the attached ...

...GE WCVH6800J2WW Washer - Resetting the Electronic Controls - All GE Appliances ... https://products.geappliances.com > appliance > gea-sup... To reset the electronic controls on your washer, shut off ...

GE Washer GTW465ASN0WW pump started spontaneously and runs continuously. The control buttons do not respond. Try a Power Rest of the control board. Washer - Resetting the Electronic Controls ...

GE front load Washer WBVH6240 BEEPS TWICE and won't start? Try a motor reset. This is the electronic washer. Unplug for two minutes, plug it in then open and close lid 7 times. This will reset motor. ...