Questions & Answers for: ge profile dryer timer working

GE Profile Harmony DPGT750GC Problem: Moisture Sensor on touch pad will not go into the "on" mode when you push button (it just beeps) and says "off" on the screen. Does the sensor work automatically ...

Dryer Doe Not Heat Finally got the cabinet apart & the element has continuity so does the safety shut off sensors. Any Ideas Have you got both breakers working? Turn them off and then on. Is the timer

...button and ohms out ok when you push it in.Door button is ok also timer does not sound like it is working also... The time my electric dryer acted like that, it turned out my door switch had gone

GE Profile dpsr473ewoww timer doesn't work and heat level is low The timer doesn't work and the level of heat in the drum seems quite low. I assume the two issues are connected and fixing one will ...

...GE Profile dryer DPSE810EG7WT does not work. I wired exactly as old dryer. L1 L2 and neutral. The timer comes on but the machine does nothing! Thanks, Roger if this is a gas dryer you would only need ...

...GE Dryer model DPXH46EAWW and yesterday after drying a full load on medium heat, it stopped working, when i set the timer for the desired temp, I press the start button and the only thing i hear is a ...

...timer isn't working, the dryer will stay on until manually turned off Hi, Your timer is bad... That is not that hard to fix and you can easily buy the parts yourselfonline... Here is a tip that will ...

...GE DPSR473EWOWW Electric dryer that has great ventilation pressure and heat is at 135-140 on cotton regular heat settng. The timer portion (20, 30, 40, minutes setting) works fine, but if you put it ...

...GE Profile. Once it shuts off you have to press the start button fo anything to light up, and it only allows you to select cotton. Sounds it is a bad timer. If it works on tumble with no heat, then ...

...the machine completely to clean,. Each dryer then worked fine. Be blessed. I HAVE A AFFINITY FRIGIDAIRE GAS DRYER THAT WILL RUN FOR 5 MIN AND SHUT DOWN NO CODE BUT IN THE TIMER MODE IT WILL RUN