Questions & Answers for: ge profile double oven code

...LOC rEF problem. The solution , press 8&6 at the same time like you would do to clear an F code and it works.THANKS BUDDY.!!!!!!!!!!!!!!!!!!! I pressed the6 & 8 at the same time and it started ...

code hey doc see if you can help with this thanks 17 http://www.fixya.com/support/t371622-locref just solved the Loc ref problem by going to Ge customer net. By pushing the 6 and 8 numbers at the same

ge profile oven loc GE Profile Electric Oven: an't seem to figure out which button to hold down for three seconds to clear "loc on" on oven panel hey - I figured it out! hold down the 9 and 0 at the ...

...GE Profile oven is beeping every minute. I've My GE Profile double stack oven is beeping approximately every minute. I've cut the power to it and that did nothing. if its an f-7 error code its due to ...

the oven says LOC and will not clear or allow me to operate burners or top oven Hi, Here is a tip that will help you... http://www.fixya.com/support/r3969401-self_cleaning_oven_problem heatman101

...work at all; nothing audible -was trying to reset time after loss of power due to t-storm Model: PT956SR2SS GE double wall oven has "LOC rEF" code Press 6 & 8 at the same time to resolve this ...

the electrical panel for our home and it turned off the power to the stove/oven and when we put the power back on we got this code. The oven works find, but we cannot ge the stove top to ignite. Code?

...GE Profile Oven F7 error messages - ApplianceBlog www.applianceblog.com/.../2655-GE-Profile-Oven-F7-error-messages Jan 13, 2006 - 10 posts - ?2 authors My GE Profile built in convection/thermal wall ...

...GE oven: 1. Make sure power to the wall oven is turned off_ 2. Completely close the wall oven control panel and return the wall oven to its normal installation_ 3. Apply power to the wall oven. ...

GE Control Panel Reset This should clear the error codes: Power off the unit, wait 5 minutes then restore the power. Press the broil and bake keys simultaneously and "SF" will be displayed. Press "Hr.