Questions & Answers for: ge appliance color change

GE Clean steel ranges microwaves or dishwashers? Ok let me try to clarify this problem for you. Anytime you apply heat to a stainless steel some yellowing is going to happen its just a matter of time.

...with GE and other appliance parts services on-line who say the panel is no longer available. Any suggestions? Yes!!! Go to www.applianceart.com, they have white, stainless, and a ton of other

...GE PotScrubber 680 My kitchen applicances are currently white in color. Is there a stainless steel 'replacement' cover/door surround offered with which I can update the look of my kitchen appliances ...

GE, it may use a clutch to come up to the proper spin speed. As the clutch wears out, it may prevent the unit from spinning well or at all. If the clutch is worn, you need to replace it. For this job,

ge profile refrigerator door handles are worn to the under material. I want to paint the refrigerator and change the handle color to stainless and black. Do you have such a thing? Model # 203C3669P011

...GE JGP963 gas cooktop. When you turn the knob the igniters come on all the burners. The spark is good. This works on all knobs. But what happens is that it will not light. It appears there is no gas ...

...appliance regulator over to LP? When you put in the orifices did you match up the proper size ones to each different size burner according to your owner's manual? They have #'s stamped on them to ...

...COLOR OF GE PROFILE WALL OVEN..... CAN THIS BE DONE? I'm in the same situation. I've done a little research and found that the oven door can be changed out rather easily. If you have your Model # and ...

...color coded but the 4 prong is red-black-white- and green.. The 2 colored wires are hot they go to the screws on either end. The white wire goes to the middle screw and the green to the appliance. ...

GE GUD27GGSSM2WW gas dryer timer replacement. I have a ge stacked unit model number gud27gssm2ww. My dryer knob sheared off the D-shaft so I bought a replacement timer. I was told I needed the ...