Questions & Answers for: gate motors Kitchen Appliances - Others

my sl 3000 ul gate wont open unless I help it out after i press button on board I have to turn motor shaft and push on gate and then it will catch and opne/close. Is it my motor or my worm gear? if ...

My elite gate won't close. the charge ok led light is not on. checked everything and it's ok. switch limit switch on both sides works fine except when trying to close, it won't run. If you disengage ...

...it closes indicates that you have the wrong polarity connected to the motor gate motors are DC so where the positive and negative wires are connected are critical for rotation direction of the ...

how to programme a nova 4 button remote on a gemini gate motor programme It's important to know that the Nova remote controls are not compatible with the Gemini gate motor. In order to get these ...

you can hear my gate motor working, but the gate does not open or close. you can open and close the gate by hand. it is as if the gear does not engage Your manual override is active. This disengages ...

Wire motor to stanley auto gate wire diagram to the gate from motor. i have both diagrams but still lil confused what exactly is your problem i have a gate system aswell I would love to get a driveway

Lift gate will not power down to closed when button on gate or remote is pushed. Lights do flash though. Gate was opened and closed manually many times due to an accident repair being done. Possibly ...

Gate motor unit is charging and battery is ok but when pushing remote the gate only moves about 20mm and stops IR beams are operational dc voltage is 13v dc sliding wheels are loose all fuses test ok ...

Doss fault displayed on the screen and gate does not work The "DOSS" fault message on a gate or door opener system is typically related to an issue with the safety sensors. Safety sensors are designed

... thanks G It sounds like there may be an issue with the opener mechanism on your Elite SL3000 fence gate. The fact that the gate opens but does not close, and that the amps rise when trying to close, ...