Questions & Answers for: Hayward gate motors

low return pressure i have a hayward pump new last season. it seems to be pumping good the pressure gauge is 22psi. but the return flow is weak. should i backflush? i did backflush when i winterized. ...

pool motorr wont tyrn on pool motor wont tyrn on , just groans If the motor is groaning you will have to repalce the motor.

...pool water is low at the skimmer after the backwash cycle, Also check to see if the skimmer weir gate (flapper) is stuck in the upright position. I would suggest 2 main checks. Fill the pool

pool motor leak seal replacement If you are asking how to replace shaft seal? open & dismantle pump from motor. Some will have thru bolt motors all the way thru the motor, heads of bolts are (4 ...

i got a bft gate motor ; when i push the remote the gate motor wants to start but it turn a litte then stop i have change thecapacitor but still the same bad motor less hassle replace whole pump

...open: Ball valves will have handles going with pipe to be open, handles across the pipe are closed. Gate valves will have a round handle and turned "Counter Clockwise all the way is open - ensure the ...

...water flow may be reduced through the heater: enough water in pool or spa? If you have a weir gate in skimmer, is it stuck in the UP position? Are any valves closed? Do you have a bypass valve ...

...water flow may be reduced through the heater: enough water in pool or spa? If you have a weir gate in skimmer, is it stuck in the UP position? Are any valves closed? Do you have a bypass valve ...

...water flow may be reduced through the heater: enough water in pool or spa? If you have a weir gate in skimmer, is it stuck in the UP position? Are any valves closed? Do you have a bypass valve ...

opener chain not moving and motor humming It is likely the motor start capacitor has failed, especially if it gets going when the motor is turned manually.