Questions & Answers for: GMC gas pedal stopped working

gas pedal down at 2500 RPM for 2 minutes and 30 second then end with a snap in pedal and release. If this doesn't work you will need to replace idle speed control. The idles is set by manufacturer and

...gas pedal being depressed. I can push the gas pedal and will start to go, then resume to idle. This continues for about 20 seconds, during which period all the warning / indicator lights on the ...

...gas pedal a little longer then letting it go, this time I could hear it fluttering again. I have three people telling me they think it is my distributor cap. Also, we have air brakes on the truck. I ...

...pedal seems to be grabing but you can feel the pulsating and its to the point where if Im approching a light and its yellow I give it more gas instead of trying to get it to brake. I took it to the ...

gas to pass a vechical and it stopped working. Dennis If you have an automatic transmission and you apply your brakes, the cruise control will shut off. If you have a manual transmission and you apply

gas pedal to allow the engine to lower the rpms. ruffly about 1000 to 1500 rpms i lightly touch the gas pedal and it goes into overdrive and it works until i come to a complete stop and i got to do it

...gas pedal and it does not work...what can I do to repair my radio...it just stopped working..no sound..stuck on station..turn off stuck on 1:00..no lights on equalizer...is 93 GMC Sierra 2500 pickup? ...

...gas pedal and right next to it is the cruse and on a different angle theirs a cable that connects to the transmission. With thte car shut off you can watch the cables and touch them as someone steps ...

gas pedal the car begins to speed up, then abruptly die? If this is your problem, is it a 2.8 V6, 3.6 V6.????? Engine size was also not listed. If it has an abrupt stop when depressing the fuel pedal.

...gas pedal I can get it started again but it will keep doing the same thing the fuel pump appears to be working fine I would really like some help in find out what causes this Have you tried replacing ...