gas smell since oven heats (slowly) from electric coil. Should oven "floor" be removed to inspect igniter? How? Thanks in advance - Happy New Year! Bob If memory serves me,there are a couple of screws
...oven hood to its optimal setting (turns out it is the most closed/natural gas setting such that the flames do not jump off the burner and have slight yellow tipping), we were able to get the oven up ...
Oven takes up to 25 min. to preheat My Tappan gas range is about 10 years old. Recently I've noticed that my oven takes anywhere from 10 to 25 minutes to preheat to 350 degrees. Do I need a new ...
Question about Profile Spectra JGBP90 Gas Kitchen Range
...on positon. If by chance this model doens't have a knob for this, then turn gas valve off for 5 min, let fumes evaporate, light flame, place over nozzle, turn gas on.replace bottom oven panel
...to 350 degrees. Cannot hear gas coming into oven, burner is lit but with very weak flame. Broiler unit seems to be working fine. magic chef cgr3760adb The main solution of it is to clean the gas
Question about CGR3730 Gas Kitchen Range
...oven burner lights and when it does light the gas fame is low and you can hear it sputtering. The oven never gets up to temp. You have a weak ignitor and the valve is not opening completely. Replace ...
Oven takes 3 or 5 min to ignite igniter comes Oven takes 2 or 3 min to ignite. igniter comes on after 15 to twenty seconds but no gas for 3 or 5 min you may need tp replace the FFD in the oven.
...oven burner light: 1. Gas pressure to the gas valve and good solenoids (2 ea) 2. Power to Oven control and selector knob set above min temp 3. Over Temp sensor closed 4. Temp control "thermocouple or ...
...5 mins but it is taking 30-35 mins we have also put 2 thermometers in the oven and they are hardly reading a true temperature look for the temperature sensor inside the oven cavity in the upper left ...
Question about 30464 / 30465 / 30469 Gas Single Oven
5 mins restarted, the spanner light was off and it ran normal. will the mechanic be able to pick up fault with diagnostic test? Hi the fault code should be stored in the ECU memory even when the light
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions