Questions & Answers for: gas logs will not light

...gas logs natural gas. when we try to light, nothing happens, it is as if the gas is not getting to the ignitor area, any suggestions Try taking a can of compresssed air and blow it in the pilot ...

...gas flow to light the pilot and get a flame prove, then the main burner lights, you will probably see the pilot flame reduce somewhat, and no longer fully surround the flame prove sensor. When the ...

...gas logs. The pilot light I have a set of propane gas logs. The pilot light will not stay lit. It seems that the safety switch is not allowing the gas to flow through. Check the connection of the ...

Gas log will light and burn for several minuits,then will shut off. It sounds like the high-limit temp switch for the flu might be tripping and causing the gas log to shut-off. Verify that the damper ...

...If the new thermacouple or/and gas supply line will not connect to your control, you can buy a new control with the pilot light parts included. Your logs have nothing to do with your fire

...logs still do not light. Hello KJGreen, It sounds, based on your description, as though the thermocouple is faulty and should be replaced. If the pilot light stays lit and you've left it on for ...

...light area to tha gas valve. It feels the heat from the pilot and keeps the gas valve open for gas to flow to the pilot or to the logs when in the lit position. Without the gas valve will stay

...gas logs (set to burn on porpane gas). Pilot lights, but not logs. I have Emberglow ventless gas logs (set to burn on porpane gas). First I connected them to a propane 20 lb tank and they worked ...

gas logs that has low gas flow I have a set of pyromaster vent-free gas logs that seems to have low gas flow. The pilot lights fine, the burners initally light fine. As they are burning you can notice

...gas coming out into the room before you light the pilot, or if the pilot goes out. Horizontal as far clockwise as possible = OFF Vertical ½ turn = ON The log needs to be cleaned before using at the ...