Questions & Answers for: Line 6 gain

...any recommendations If you have 2 "volume controls" such as "vol" and "master vol" or "vol" and "gain", try turning them in opposite directions about 1/8 turn at a time, checking the sound at each ...

...change the channel presets and when I turned the amp modeling knob to insane it started happening again. Then I remembered that's exaclty what I was doing when it triggered the first time. It sounds ...

...so I would NOT let that oscillating conditipon persist for any length of time. Do NOT use excessive gain at the front end,,, use higher master volume and less front end gain if you are having ground ...

When I play my Line 6 Spider III Amp (Stack), the volume and gain output is very weak even though the settings are maxed, and the tone is very strained and sharp. It basically lost all of it's kick. ...

...unlless you have a problem with the cable or source you are using or have forgot to turn up the gain controls which I am sure you have checked. There are so many possibilities that there is no

...the cord you unplug from the guitar and preferably try it with a second cable as well. If at high gain you don't get a loud hum, best to take unit for service. If it hums, then check battery in

is there a gain setting on the tbp12 transmitter There does NOT appear to be a gain setting like available on other brands. These are digital links that have a fairly wide dynamic range. If you are ...

...when my Pocket POD is plugged in. The humming/hissing gets increasingly louder when higher gain and/or volume settings are selected. I've had this device for just over a year and I

...you're playing thru. but generally the settings you want for a clean sound. check your drive (or Gain ) knob. You want it about half way.and your Channel volume, half way. those are good starts. ...