Questions & Answers for: fuses dewalt radio

...dewalt radio say people out there in ciber world , any of you peps know how to fix a dewalt that doesn't power up at all?..i already changed the AA batteries in the back also installed a charged up ...

dewalt radio will not power on but still charges the battery You are lucky it still charges battery. Your transformer for the radio has a fuse on the winding, this has gone or the transformer has gone

...dewalt battery I've got the same problem...completely lifeless, checked all fuses (found 3 on the different boards). Can a fail on the mains board stop the charger/radio circuitry? no sign of blown ...

...or play on battery power it plays when plugged in but won't charge, the batts are fine will charge in other charger. Any help please could be a fuse in the radio. check with your local dewalt

...Dewalt Radio/Charger. I am not sure what the problem is. It was working one day, then the next it wasn't. Replace the AA batteries they are located inside the battery chager. these batts. control the ...

...dewalt dw911 radio/charger works on either mains or battery but wont charge a battery and blows an internal fuse when both are used together More than likely your internal charger is faulty. Inside ...

...Dewalt radio won't work. Replaced all fuses and fresh batteries for clock, etc. When plugged in or running off of the Dewalt battery i hear a light pop sound when I turn it on like it is going to ...

radio has an internal fuse that should be checked.Go here:http://servicenet.dewalt.com/Products/Detail/DC011Select the type that you have (#1 or 2)On the parts diagram, look for #9 (fuse) and you will

I need to know if there is a fuse in the dewalt DC012 worksite charger radio power surged in house From what i gathered there are two Fuse (part No. 5140019-09) Fuse 1A (part No. 429790-32)

...dewalt radio dc012 blow fuse in power board,fuse replaced and radio work,after while fuse ok but radio again doesn’t power up I read this as this: You replaced a blown fuse, the new fuse still looks ...