Questions & Answers for: Xerox fuser problems Office Equipment & Supplies

Ad

Question about DocuPrint N32 Laser Printer

1 Answer

Fuser temp error Hi, Replaced fuser unit as advised error still occuring. How can I check that new Fuser unit is ok? To test fuser out of circuit make sure lamp and thermal fuse are not open circuit, ...

Ad

Question about DocuColor 12 Color Copier

1 Answer

error 10186 docucolor 12 what can i fix it thanks 10-186 is a fuser problem.Check for jammed paper in fuser or low fuser oil.Might have bad fuser lamp or fuser thermal fuse.

Ad

Question about Phaser 6120/YN Laser Printer

3 Answers

Xerox Phaser 3100 Printer Error Fuser Temp. Printer Error Fuser Temp. fuser Temp printer error problem.please give me the solution. hpaser 3100 mfp  printer error fuser temp fuser reset menu * ...

...problems on the good fuser modual, causing one to replace it again along with the new triac/switching boards at the same time. If the machine is in good condition, place a service call to repair

Question about Phaser 3100MFP/S Laser Printer

1 Answer

PRINTER XEROX 3100MFPX FUSUR TEMP PROBLEM Most likely you have had a fuser failure. It could possibly be the fuser and power supply board. If the fuser rolls melted together, I would replace both, if ...

Question about Phaser 3100MFP/S Laser Printer

5 Answers

Printer Error Fuser Temp. in xerox 3100mfp I getting the problem in Xerox 3100mfp "Printer Error Fuser Temp. in xerox 3100mfp" please sugest me SISODIYA COMPUTERS "I AM SOLVE THE PROBLEM FUSER TEMP ...

Question about CopyCentre C123 Black and White Copier

1 Answer

...of this code in your copier 010-150, 155 -Too much or not enough paper in duplex tray 010-300 --Fuser thermistor, 010-302 --Low fuser temperature , 010-304-- Bad fuser temp, 010-308 --High fuser ...

Question about Phaser 7400DN Laser Printer

1 Answer

FUSER GETTING OVER HEATED IN XEROX PHASER 7400.SOMETIMES A4 PAPER GETTING JAMMED IN FUSER ,WITH A3 PAPER THERE IS NO PAPER JAMMING PROBLEM. Hello, try to clean paper feeding rollers and chek fuser ...

Question about Phaser 3100MFP/S Laser Printer

1 Answer

i am having xerox 3100 mfp,and since last 4-5 dys massage on the screen is displayin FUSER TEMP. how i can get rd of this? pl help Fuser problem is that the thermistor can be damaged due to ...

Question about DocuColor 3535 Copier

1 Answer

Error 010 110 The fuser exit switch sees something in the fuser. The exit switch is stuck . there is actually a piece of paper in the fuser. Or the switch fell out of the slot. You can just losten the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...