Questions & Answers for: OKI C fuser problems

Question about C5100n Laser Printer

1 Answer

...fuser is only 65% used. We have been having some problems for awhile with it printing two copies fine and then starting to print like the fuser isn't working, like melted pictures and unfinished ...

Ad

Question about C5150n Led Printer

2 Answers

oki c5150 fuser jamming on and off when a sheet is maybe 1 inch out of the fuser it starts to jam up in the fuser (pull the paper out and it looks like an accordian). I bought a new fuser...and it is ...

Ad

Question about KIT-C3530N MFP LASER CLR P/S/C/F USB ENET 1200X600 128MB Printer

1 Answer

OKI C3530 MFP Service call 155: fatal error Looks like a fuser problem. Re-saet the fuser. Check for pieces of paper, etc. in the path. Service call 155: Error Defective fuse cutting of fuser Is the ...

Question about C5800Ldn Led Printer

1 Answer

this problem. Thanking you in advance, Service call 980:Error Cause: Error by media clinging to the fuser Error description: Media has clung to the fuser. Solution: Power OFF. Replace the fuser unit

Question about C5500n Laser Printer

4 Answers

...C5600 i got that error on the first day i got my oki c5950 it was a result of a paper jam in the fuser unit, i removed the jamed paper but the error was still there, i contacted oki support and

When I print to my Oki C3200n the paper comes out with a giant crease in it. The fuser was replaced and the problem still persisted. Are there any other possible solutions? The "fuser" uses heat to ...

I have a Oki color laser printer C5150. I have installed a new fuser and I have a code #173 Fatal error.This is the second fuser, I installed a new one about two weeks ago and had the same code. I can

Question about C5100 Laser Printer

1 Answer

...problems with color, i have to print 5 copies to get a good copy, as the color just runs down page Just solved the same problem. Mine was the fuser. It is either the drums or the fuser. Print ...

to get a clean copy without the duplicate print? You have to determine if the drum cartridge or the fuser is the problem. Do a panic stop before the paper hits the fuser and see if it has the residual

...the computer the computer doesn't acknowledge that anything was plugged in. If I remove the Fuser Unit, then the computer recognizes the computer, but I cannot print (obviously). As soon as I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...