Questions & Answers for: OKI fuser problems


Question about C5100n Laser Printer

1 Answer

...fuser is only 65% used. We have been having some problems for awhile with it printing two copies fine and then starting to print like the fuser isn't working, like melted pictures and unfinished ...


Question about B6300n Printer

2 Answers

...up frequently and this printer has just been replaced. Any ideas on this one? Please replace the fuser part. In almost case, this problem generally Fuser part has a problem. Or the sensor of Fuser ...


Question about C5150n Led Printer

2 Answers

oki c5150 fuser jamming on and off when a sheet is maybe 1 inch out of the fuser it starts to jam up in the fuser (pull the paper out and it looks like an accordian). I bought a new fuser...and it is ...

Question about KIT-C3530N MFP LASER CLR P/S/C/F USB ENET 1200X600 128MB Printer

1 Answer

OKI C3530 MFP Service call 155: fatal error Looks like a fuser problem. Re-saet the fuser. Check for pieces of paper, etc. in the path. Service call 155: Error Defective fuse cutting of fuser Is the ...

Question about C5800Ldn Led Printer

1 Answer

this problem. Thanking you in advance, Service call 980:Error Cause: Error by media clinging to the fuser Error description: Media has clung to the fuser. Solution: Power OFF. Replace the fuser unit

Question about C5500n Laser Printer

4 Answers

...C5600 i got that error on the first day i got my oki c5950 it was a result of a paper jam in the fuser unit, i removed the jamed paper but the error was still there, i contacted oki support and

Question about OL 400e Led Printer

1 Answer

...occasionaly a transfer roller will cause it as well. Toner loves to get baked onto the fuser and cause all kinds of print problems. Not much you can do but to replace the fuser when this

I have a Oki color laser printer C5150. I have installed a new fuser and I have a code #173 Fatal error.This is the second fuser, I installed a new one about two weeks ago and had the same code. I can

Question about C5100 Laser Printer

1 Answer

...problems with color, i have to print 5 copies to get a good copy, as the color just runs down page Just solved the same problem. Mine was the fuser. It is either the drums or the fuser. Print ...

to get a clean copy without the duplicate print? You have to determine if the drum cartridge or the fuser is the problem. Do a panic stop before the paper hits the fuser and see if it has the residual

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment and Supply Experts

Alvin Barnabas
Alvin Barnabas

Level 2 Expert

134 Answers

Timothy Van Der...

Level 2 Expert

152 Answers


Level 3 Expert

4372 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides