...fuser removed from machine, checking lamp etc for open circuit, thermistor should be neither short or open circuit. These days we dont, we just change assembly due to it being a common constantly ...
...my samsung 4216f showing over heat detected and lamp in the fuser unit is not getting on You have a bad fuser unit. Since the copier does not complete the self-test process, the lamp does not turn
...fuser unit , the halogen lamp is not heating , on the top of the fuser unit is a Thermostat in series with the halogen lamp wich u have to replace. Its not that easy if you dont have experince but it ...
---- i have the problem in scx-4200 IN PRINTER SCX-4200 it has a long time to reach normal temperature, also if it has printed 4-5 minutes before 1. clean fuser 2. replase fuser lamp
...situation Tomasi Giyani, South Africa the fuser lamp is likely blown, if you turn it on and leave it for a few minutes and then feel the back access door and it is cold you will need a new fuser ...
Question about SCX-4720F All-In-One Laser Printer
...meter, you can find out if the fuser heater lamp is bad, the thermistor is bad, or there's no power to the fuser. www.precisionroller.com will have a new fuser for you if you can't repair the old
Question about SCX 4521F All-In-One Laser Printer
...fuser lamp is blown. The fuser lamp is inside the hot roller at the back which melts the toner onto the page. It is not really a user serviceable part, you would need someone qualified to ...
Question about SCX-4300 Monochrome Laser Multifunction Printer
...fuser lamp in the same voltage of the printer. Take off the fuser, disassemble then take off the lamp and connect two wires in each terminal of the lamp (Fuser lamp works on the same voltage as the ...
can I fix it? Dear Its related to the fuser assy. Pl. check the fuser thermostat and heating lamp. for if its open replace it, check the thermistor resistance if it open replace it, Check SMPS. Thanks
Usually answered in minutes!