Questions & Answers for: HP LaserJet where is the fuser lamp

...off printer, check and reseat fuser. no luck. any suggestions? fuser was not hot... Replace fuser assembly is the fix Normal consumable, the lamp electrics (lamp, thermistor) will have blown. Part ...

...2840 and when you try to print it comes on the window 50.1 fuser error and won't print Your fuser lamp is not coming on. Reseat the fuser. If that does not help, your fuser will need to be

problem with the fuser lamp sleeve I need a fuser lamp for hp laserjet 1010 call authorised dealer HP at your region.

...fuser heater lamp is blown and you need to get another one (whole assembly). I personally use printerworks at www.printerworks.com to order a new one if you want to do it yourself, otherwise you will ...

...you can buy just heating lamp but can help the rest of the parts, best Fuser Unit (Attention is for 120V) http://www.precisionroller.com/search.php?curr_page=1 Fuser unit 220V : RM1-0561 Hope this ...

...will not go away and the printer will not work. That fuser error says that either the overtemp fuse is burned out, or the lamp is burned out, you most likely need a new fuser for the error to go

fuser is the heating unit near the paper exit, and that error means the lamp is burned out, the overtemp sensor is out, or the thermistor in the fuser is bad. About all you can do is replace the fuser

...fuser lamp. The fuser lamp is about 10 to 12 inches rod shape lamp located inside of the hotroll. You will have to remove the fuser assembly to access the lamp two or four screws). If the lamp's ...

...fuser has a problem. Most common problem is the heat lamp burned oou. The lamp is not a replaceable item unless you re a top notch technician. The fusing assembly however is usually a relatively easy ...

...fuser lamp.The fuser is the part of the printer that is fusing the toner to the paper.If you open you back door of the printer you will see two rollers.One pressure and one fusing.Inside the fusing ...