Questions & Answers for: fuser broken

...fuser jam switch may be broken or the tip of that has brittled and broken off. Also the plastic baffles after the paper leaves the fuser may be warped out of shape causing unlevel arrangment of copy ...

...PUT IN NEW CARTRIDGE, AND IT STILL SAYS PAPER JAM Check the fuser for paper stuck in it. Check that the 'paper out' sensor arm (in the fuser) is not broken. If it IS broken, you'll need a new

...fixing fuser film is worn out or broken remove the fixing unit ang check the fuser film if its worn out broken replace a new one . Hope this helps. Please rate my response. Thanks. Have a good ...

...the DC controller PCB. I think you've some problems on the connectors, check the connections. If you are able, replace the broken fuser roller from the old fuser with one from the new

...broken gear Get fuser open message. Will print several sheets then error - red light green light. Removed fuser unit brown gear not broken (no gears broken) gears turn easy. Anyone have any ...

mite be able to find refurbished unit. If accordion check to make sure the pick fingers are not broken they prevent paper from wrapping around the fuser roller. one mite be broken causing it to hit it

...and 3 pages later it did it again on me. The micro "flag" located at the fuser has been broken or dislocated or some gears broken and fuser not spinning. If you cannot get spares, buy a new ...

...bearing is broken or worn out.worst case fuser drive motor. those fusers are rated at 500k. Take the front cover of the fuser assembly off and inspect that area for the problem. look for broken

...error code used with bigger copiers Error 6000 is fuser related. Broken fuser lamp error =bad thermistor =broken thermal cutout =bad fuser lamp check these items, if possible replace fuser

...than a heater element. One fuser is broken and the other isn't. You need a new one. Or did you mean the broken one works in the other machine? In which case the power to it is disconnected