Question about 55PP9363 55" Rear Projection HDTV-Ready Television
...fuse (TV specs show 255watts, 4 amps is probably too much) Now, upon pushing power on, I hear the system power up, and it starts to chirp. No other picture is present. Suggestions? Thank you, TJ I ...
...ic's. but the problem may not be the ic's alone, there may be several resistors open or open pico fuses. So if you are not technicaly inclined donot attempt this repair. it's not just the ...
fuse and it blew it again. Thanks for the help how can u tell if the capacitor is "swollen" like garbage state without seeing any physical damage on it? Ok so here is my update. I spoke with people at
fuse and it blew it again. Thanks for the help yeah my moms 32'' trutech tv has been out for maybe 3-4 months we have been looking for someone to fix it im only 14 and man ive had the whole main power
venturer PLV 1615 15 inch LCD TV TV doesn't come on. Standby light off. Fuse ok. The problem is in the power supply. If I had a schematic I could fix it myself. Can anyone tell me where I can get a ...
Question about LNT5265F 52 in. LCD HDTV
...table and placing the TV face down. I started with the power supply as an obvious beginning. Both fuses on the board tested fine. And touched up every solder joint with a hot soldering iron in case ...
...table and placing the TV face down. I started with the power supply as an obvious beginning. Both fuses on the board tested fine. And touched up every solder joint with a hot soldering iron in case ...
...venturer plasma tv wont turn on. it is only 9 months old. I turn it off one night and the next day it would not turn back on. the red light in the bottom right corner also does not light up anyh more ...
tv is not getting turned on Manually/ Remotely..! Hi I own a Veturer 19 inch LCD at (LCD 19 - 106) at my bedroom...Last week while turning it on amually suddenly it stopped working & since then it
Question about 19 inch flat screen TV
...tv UMC x216/17b gb-ftcd-uk 21.6" doesn't turn on anymore. No LED light but consecutive clicks on DVD area. The power supply is working (12V), I unplugged the backlight screen board and the DVD unit ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions