Questions & Answers for: Brother is there a fuse in this unit

E50 error How do I fix this myself E50 is fuser code, it has blown the heat lamp or thermal fuse. the best solution is to replace the fusing unit. let me know if this helps

my fusing unit is going out i believe it is making a very loud noise i have a brother hl-2700cn my paper gets hung up all the time in the back through the fusing piece check the sensor on the printer ...

...fuse, two actually, inside the unit. My 7820N died after a power surge. here is how I fixed it. unplug the power cord raise the glass/ feeder assembly open the front cover and remove the toner ...

Brother Intellifax 2820 shadow or ghost printing. I cleaned the corona wire by slide the tab over 10 times yet the text is shadowed on the paper. Have you replaced the fusing unit, the hot unit in the

I am getting ink spots ~2.5 in. apart on the left edge of the paper. The spacing is consistent on every sheet it prints. I have tried to clean the corona wire and replaced the toner. the fusing unit ...

How do I replace the brother fuser? The fusing unit and the parts around it are hot! Be sure to wait until the fusing unit has cooled down sufficiently before replacing the fusing unit. If you touch ...

how do i repare is fuse in side bord how do i repare is fuse in side bord u cannot repair. If fuse is gone check diodes in the poer supply. check fuser unit also.

How do I replace a Fuser ? Sir/Madam The Problem Is Very Simple ,You Need To Follow Few simple Step To Fix This Issue Turn off the machine's power switch. To avoid injury, wait until the machine has ...

Brother MFC-7040 smudging try replacing the drum unit.If that doesn't work look at replacing the fusing unit.there may be a blue slider on the front top of the drum unit;if so slide it back and forth ...

6b error what part replac fused unit or power supply Error 6b unable to printer Your fuser unit is faulty, could be due to the thermistor in it.