...else, and were do I find one of these capacitors/fuse? the thermal fuse is for safety reasons The Lasko fan I have that stopped working needed the thermal fuse replaced go to radio shack they have ...
lasko ionizer tower fan was great until it stopped working after 4 months. Should I take it apart (around 12-16 screws) Any other suggestions. It just stopped--no slow-down, noises, etc. Hi suedevito,
Question about 48" Xtra Air Tower Fan with Air Ionizer
...fan? my lasko tower fan gets power and the light turns on and it will rotate but it wont blow air out and i tried cleaning it and still wont work? check motor bearings and thermal fuse on motor ...
fuse We have 2 Lasko Tower Fans, model 2510 that both spontaenously died, one day while I was at work. Anyone know if they have a fuse I can check and or replace? They are less than a year old, but as
how to open a lasko 3520 doesnt turn on, need to open how to open lasko 3520 and change the fuse
fuse on lasko fan Lasko Cyclone fans have a thermal fuse (typically 130 degrees C) placed on the armature of the motor, connected between the input voltage line and the start capacitor. It is not user
Question about 3520 20-Inch Cyclone Fan
fuse Lasko Cyclone fans have a thermal fuse (typically 130 degrees C) placed on the armature of the motor, connected between the input voltage line and the start capacitor. It is not user replaceable,
Question about 3520 20-Inch Cyclone Fan
My Lasko fan model number 2559 just suddenly stop having any power why The motor has failed, very common on these cheap fans. Did you check fuses? oil bearings
...working. Took the motor apart and noticed the one bearing is shot, probably causing the fuse to blow. My question is, can you buy the cord/plug from Lasko. HOW WOULD WE KNOW IF LASKO SELLS TO ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions