Hie I have a Gestetner DSm615 which is giving me error code SC:552.How do i solved this problem? Enter SP mode by pressing; Clear (yellow) button 1 0 7 Press and hold the Stop (orange) button for 3 ...
The copier powers on and displays error E55 and does not warm up Fusing error Thermistor open Fusing lamp open Poor thermistor connection or Defective main control board or ac drive/dc power supply ...
dsc232 code 571 how to reset Error code 571 is for oil overflow sensor error.If you pull out fusing unit,on the left side of it there is an oil unit attached,that has oil sensor on it.Most common ...
...error code. Please do rate the solution and revert for further assistance. Thanks Rylee Hi Andy in regards to your solution, how to "TAKE THE FUSER OUT CHECK THE THERMISTORS" were is thermistor? ...
Question about DSm515pfd Digital Copier - Printer - Scanner - Fax
I have a Lanier 5635 and its not working. The error code is SC546. Ant ideas whats going on. 546 A Unstable fusing temperature The fusing temperature varies 50°C or more within 1 second twice ...
error sc:544 Hi SC544 error means Fuser Overheat Error 1 (Hardware). This has happened due to Fuser Low Temperature which occurs due to Abnormal Hot Roller Fusing Lamp Lower Limit Temperature Detected
gestetner dsm645 error code sc548 The machine cannot detect the fusing. Fusing unit is not installed. Try to put the fuser in the place.
Question about Aficio 1035/g/p, 1045/g/p Universal For 3502/p , 4502/p 885247gen
the copier doesnt work error code 545 That is a Fusing Error Code.These can only be reset by entering into Service Mode. I do not recommend just resetting the code, as this code indicates that ...
Question about DSc460 Copier
...feeder or trays. SC 546 - Fusing ready temperature malfunction,unstable fusing temperature.Chek the fuser unit upper fuser roller thermistors,if dirty clean it,check the fusing unit connection or ...
error cs548 in ricoh mp c4500 SC548 Fusing unit rotation error The fusing belt sensor does not detect change in the actuator for 0.5 seconds after the fusing/paper exit motor has turned on. * ...
Usually answered in minutes!
33 Questions
21 Questions
25 Questions
22 Questions