epc light on dash and brake lights not working if it is a fuse i cannot work out which is the correct fuse from the fusecard. I dont have an owners manual I doubt it's the fuse. A very common problem ...
epc ligh whitch is fuse for EPC I check but I can"t find this light is not fused it indicates you have a serious electrical failure of some sort, havwe VW test the system for the code to ID the ...
...or fails it goes to full throttle pressure. You need to have the system scanned, check for blown fuses and have someone go into the trans information and see if the epc is getting
...fuse. Now the EPC light is on in the dashboard, and the car will turn on but it is locked in park no matter what I do. shift lock is stuck. you're on the right track. check fuses. all of em, but I ...
Question about 2006 Jetta
...the key on for a test could be a blown fuse for the computer since the EPC light is not on a fuse. You may have to check them all to make sure. Of course the bulb could be out
99 passat 1.8 turbo turns over no start new battery timing belt was done 8 mths ago all fuses good tried another ecm ???? I wnet out of gas on my VW Beetle 2001 last saturday. When I added gas to the ...
Question about As Is" 6qt. Digital Pressure Cooker w/Hindged Lid - Red -
I have model K41143/EPC-678 and it worked fine last night but now I have no power nothing comes on. Please help. Model K41141/EPC-678 Have you checked the plug fuse?
Question about Repair Manual for 1999-2004 VW Golf, GTI, and Jetta
fuse box of VW golf 2004 which related to EPC light, what #? EPC light on caused decelerate the speed; at 40m/hr, rpm stalled at 30 and tendency going up(not shifting to the next gear) Mechanic tried ...
Question about Repair Manual for 1999-2004 VW Golf, GTI, and Jetta
...EPC). Its pretty important. Its not likely a fuse. Most likely you forgot a vacuum line or knocked a line loose. Check over the hoses near the alternator that might have been moved or damaged. As ...
Question about Repair Manual for 1999-2004 VW Golf, GTI, and Jetta
...fine until you put it in gear. then it go in to a limp mode. truck barely moves. code is a p1747. fuses are all ok , trans pan is off EPC ohms at 5 . checked for grounds at the plug that connect to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions